Saturday, September 27, 2014

Going To Hell



Going to Hell
written on 9/27/2014

Supplies Needed:



Mask of your choice. I am using mask #177 by Insatiable Dreams. You can get her awesome masks at http://insatiabledreams.net

Font of choice. I am using Impact and SF Covington SC. You can get the Covington fonts from http://www.1001fonts.com/sf-covington-font.html

Lets Begin:

Open element 1 and shift+D to duplicate.
Close the original.
Make your canvas large enough to work with.
Open the tube and copy and paste the laying down tube.
Re-size her so she will fit nicely along the top of the letters.
Add a drop shadow to both the letters and the tube.
Open paper 25 and copy and paste as a new layer.
Drag to the bottom and apply the mask.
Delete the mask layer and merge the group.
Using a font of your choice add some text if you would like.
Open element 84 and copy and paste as a new layer and place along the bottom of the “Hell” text.
Erase some bits of needed if it overhangs.
Add a drop shadow.
Open element 90 and copy and paste as a new layer and place behind your tube.
Add a drop shadow.
Open element 61 and re-size so it will fit nicely along side of the text.
Copy and paste as a new layer and add a drop shadow.
Open element 104 and re-size so it will fit nicely in front of the text.
Copy and paste as a new layer and add a drop shadow.
Add your name.
Add your copyright and licensing information.
Crop and save.

Silent Beauty



Silent Beauty
written 9/27/2014

Supplies Needed:


Scrap Kit is by Bibi's Collection. You can get it at http://scrapsncompany.com/index.php?main_page=product_info&products_id=5727

Font of your choice. I am using Belluccia. It is a PTU font and you can purchase it at http://www.myfonts.com/fonts/correspondence-ink/belluccia/

Lets Begin:
Open element 23 from the kit and shift+D to duplicate.
Close the original.
Re-size so it will fit nicely within your tag. It is not the main focus but will be off to the left side. Use my tag for reference.
Make your canvas large enough to give you plenty of room to work with.
Move the frames to the left side.
Using your magic wand select the inside of the 3 frames.
Selections modify and expand by 5.
Open your half body tube and copy and paste as a new layer.
Drag under the frames.
Position so her face is in the top frame and the other 2 frames will work themselves out.
Selections invert and hit delete.
Open paper 2 and copy and paste as a new layer and drag to the bottom.
Hit delete on the paper layer.
Selections select none.
Merge these 3 layers together.
Open element 50 and copy and paste as a new layer and re-size so it will fit nicely behind the frames.
Drag under the frame.
Add a drop shadow.
Set your foreground color to black and turn off your background color.
Now using your rectangle preset shape tool with the width set to 6 we are going to draw a square next to the frames.
Use my tag for reference on the size if needed.
Using your magic wand select the inside of the square.
Selections modify and expand by 2.
Layers new raster layer and drag under your square.
Open paper 10 and edit copy and paste into selection.
Selections select none.
Open element 61 and copy and paste as a new layer and position with your square.
Re-size so it fits nicely.
Open element 35 and copy and paste as a new layer and drag to the bottom.
Re-size so it will fit nicely from one side of your tag to the next.
Open element 9 and re-size so it is just bigger than your square.
Copy and paste as a new layer at the top and position in the middle of your square.
Add a drop shadow.
Open element 13 and re-size so it will fit nicely next to the tower.
Copy and paste as a new layer and place on the right hand side.
Add a drop shadow.
Open element 14 and repeat the above steps but place this one a little lower than the first.
Open element 12 and re-size and copy and paste as a new layer at the top and place between your frames and your square.
Open your full tube and copy and paste as a new layer and place on the right side of your square.
Add a drop shadow.
Open element 24 and copy and paste as a new layer and place inside of your square at the top left.
Duplicate and move this layer to the right side.
Open element 63 and re-size.
Image flip horizontal.
Copy and paste as a new layer at the top on the left hand side of the white frames.
Add a drop shadow.
Open element 69 and copy and re-size.
Copy and paste as a new layer and place on the right hand side of the white frames in the middle.
Add a drop shadow.
Open element 76 and re-size a bit.
Copy and paste as a new layer and place so it is coming out of the pile of hearts and up and over your main tube.
Add your name and copyright/licensing information. 
Crop and save. 

Wednesday, September 24, 2014

Bewitch You


Bewitch You
written 9/24/2014

Supplies Needed:


Matching Scrap Kit by Design By Joan called Bewitch. You can get it at http://scrapsncompany.com/index.php?main_page=product_info&products_id=5681

Mask of your choice. I am using masl # 47 by Weescotlass Creations. You can get this mask at http://weescotslasscreations.blogspot.com/

Font of your choice. I am using Feel Script. It is a PTU font.

Silver or grey gradient of your choice. You can get some great gradients at http://www.essexgirl.uk.com/gradients-p1.htm or at http://trash-graphics.livejournal.com/26230.html

Lets Begin:
Open element 47 and shift+D to duplicate.
Close the original.
Re-size by 85%.
Make your canvas large enough to work with and create your tag on.
Move the frame to the top left corner of where you're going to build your tag.
Using your magic wand select the inside of the frame and go to selections modify and expand by 4.
Layers new raster layer and drag under the frame.
Flood fill this new layer with your silver/grey gradient set on the the following settings:

 
Leaving your frame selected open your tube.
I flipped mine horizontal so she would be facing opposite to the tube I am going to add later but this is completely up to you.
Copy and paste as a new layer under your frame but on top of the gradient layer.
Selections invert and hit delete on your tube layer.
Selections select none.
Add a drop shadow to your tube and lower the properties of this layer to 50.
Add a drop shadow to your frame.
Open your tube again and copy and paste as a new layer.
Position on the right side of the frame.
Re-size if needed so it is just bigger than the frame.
Open element 27 and re-size by 50%.
Copy and paste as a new layer.
Drag to the bottom and position behind the frame but at the top left.
Open paper 4 and copy and paste as a new layer and drag to the bottom.
Apply the mask.
Delete the mask layer and merge the group.
Open element 2 and re-size by 85% 2x.
Image flip horizontal.
Copy and paste as a new layer and move under your main tube.
Move to the lower left of the tag.
Add a drop shadow.
Open element 5 and re-size by 50%.
Copy and paste as a new layer and drag under your main tube.
Move to the top center of the frame.
Add a drop shadow.
Open element 18 and re-size by 75% and then again by 85%.
Copy and paste as a new layer.
Drag under your tube and position.
Use my tag for reference.
Open element 19 and copy and paste as a new layer and drag to just above your mirror.
Re-size so it will fit nicely over the mirror looking like it is attached to different items in your tag.
Adjust add/remove noise. Add noise at 100%.
Add a slight drop shadow.
Open element 28 and copy and paste as a new layer.
Re-size so it will fit nicely on the back end of the broom the tube is holding.
Add a drop shadow.
Open element 32 and re-size by 50%.
Copy and paste as a new layer and place somewhere within the spider web on the mirror.
Add a drop shadow.
Open element 45 and re-size by 50%.
Copy and paste as a new layer at the top and move over on top of the moon.
Add a drop shadow.
Open element 50 and re-size by 50%.
Copy and paste as a new layer.
Drag under the pumpkin and place to the right of the pumpkin.
Add a drop shadow.
Open element 82 and copy and paste as a new layer.
Move to the bottom of the tag.
Add your name.
Add your copyright and licensing information.
Crop and save.

Wednesday, September 17, 2014

Birthday Time





Birthday Time
written 9/17/2014

Supplies needed:


Scrap Kit by Bibi's Collection. You can get it at http://scrapsncompany.com/index.php?main_page=product_info&products_id=4110

Font of your choice. I am using Happy Serif. You can get it at http://all-free-download.com/font/cartoon/happy_serif_92_download.html and also Happy Birthday unfortunately the second font is PTU so any scripty font will work.

Lets Begin:
Open element 31 and shift +D to duplicate.
Close the original.
Re-size to a size you are happy with as this will be the base of your tag.
Select the inside of the frame with your magic wand and go to selections modify and expand by 25.
Layers new raster layer and drag under the frame.
Open paper 2 and edit copy and paste into selection.
Selections select none.
Add a drop shadow.
Open your tube and copy and paste as a new layer.
Re-size.
Move to the left side of the frame.
Open element 36 and copy and paste as a new layer.
Drag to the bottom.
Open element 49 and copy and paste as a new layer.
Drag behind the tube and move to where it rests behind the bunny but peeking out.
Open element 48 and re-size by 50%.
Copy and paste as a new layer.
Drag behind the bunny and move to the left side.
Open element 34 and re-size by 75%.
Copy and paste as a new layer and drag under the presents.
Move to the left side of the blue present.
Duplicate and re-size by 85%.
Move this duplicate down and to the right a bit.
Open element 33 and re-size by 75%.
Copy and paste as a new layer and place to the right of the first pink balloon.
Duplicate and re-size by 85%.
Move down and over a bit.
Open element 4 and re-size by 50% and then again by 75%.
Copy and paste as a new layer and move to the bottom right of the tag.
Add a drop shadow.
Add your copyright and license information.
Add your name and any other text you want.
Crop and save.




Saturday, September 13, 2014

Night Beauty




Night Beauty
written 9/13/2014

Supplies Needed:


Scrap Kit by Bibi's Collection. You can get it at http://scrapsncompany.com/index.php?main_page=product_info&products_id=5362

Mask by Moonbeams and Spiderwebs. I am using mask # 27. You can get it at http://moonbeamsandspiderwebs.blogspot.com/2012/01/masks-26-27.html

Font of your choice. I am using Riky Vampdator which you can get at http://www.1001fonts.com/riky-vampdator-normal-font.html

Lets Begin:
Open element 49 from the kit and shift+D to duplicate.
Close the original.
Re-size by 85%.
Make your canvas large enough to give you room to work with.
Using your magic wand select the inside of the window.
Selections modify and expand by 8.
Layers new raster layer and drag this new layer under the window.
Open paper 10 and edit copy and paste into selection.
Selections select none.
Open element 108 and re-size so it will fit nicely within the window.
Edit copy and paste as a new layer under the window but above the paper.
Place at the top of the window.
Adjust add/remove noise. Add noise at 100%.
Add a drop shadow.
Add a drop shadow to the window.
Open your tube and select whatever layers you want to use.
Edit copy and paste as a new layer.
Re-size so she will fit nicely on the windowsill. She is going to be a tad bit bigger than the window but you don't want her to be too big.
Use my tag for reference if needed.
Add a drop shadow to the tube.
Open paper 9 and copy and paste as a new layer.
Drag to the bottom.
Apply the mask and delete the mask layer.
Merge group.
Open element 10 and copy and paste as a new layer.
Drag to just under your tube and position the larger cloud behind the head of your tube.
Open element 43 and re-size so it will fit nicely on the post opposite of your tube.
Add a drop shadow.
Open element 77 and re-size by 75%.
Copy and paste as a new layer.
Drag to just under your window.
Position on the side opposite of your tube.
Open element 87 and re-size so it will fit nicely behind your window scene.
Copy and paste as a new layer and drag to just above your mask layer.
Position opposite your tube.
Duplicate.
On the top copy go to adjust blur gaussian blur of 20.
Lower the opacity of the blurred layer to 60.
Add a drop shadow to the bottom layer.
Open element 97 and re-size by 50%.
Image flip horizontal.
Copy and paste as a new layer and place over the top of your moon.
Add a drop shadow.
Open element 1 and re-size so it will fit nicely on the window ledge opposite of your tube.
Copy and paste as a new layer and then add a drop shadow.
Add your name.
Add your copyright and license information.
Crop and save.


 

Friday, September 5, 2014

Mad Mad World




Mad Mad World
written 9/5/2014

Supplies Needed:

Tube of your choice. I am using the work of Danny Lee. You can get this tube at http://scrapsncompany.com/index.php?main_page=product_info&cPath=161&products_id=5304

Scrap Kit is by Kizzed by Kelz. You can get it at http://scrapsncompany.com/index.php?main_page=product_info&products_id=5307

Font of your choice. I am using 2 Peas Weathervane.

Plugins:
Penta Dot and Cross
Xero Porcelain

Lets Begin:
Open element 42 from the kit.
Shift + D to duplicate.
Close the original.
Make your canvas large enough to work with.
Using your magic wand select the inside of the frame.
Selections modify and expand by 6.
Layers new raster layer and drag under the frame.
Open paper 10 and copy and paste into selection.
Selections select none.
Apply Penta Dot and Cross with the default settings to the paper layer.
Using your magic wand select the inside of the frame again.
Selections modify and expand by 2.
Open the close up of your tube and copy and paste as a new layer.
Apply Xero Porcelain with the default settings.
Apply Penta Dot and Cross to the tube using the default settings.
Change the properties of the tube layer to Luminance Legacy.
Add a drop shadow to your tube and to the frame.
Open element 52 and copy and paste as a new layer.
Drag to the bottom.
Place in the top left corner.
Duplicate and move the duplicate to the bottom right.
Merge these 2 layers together just to minimize your layers and help you keep them straight.
Open your full sized tube and copy and paste as a new layer and move to the far right side of the frame.
Add a drop shadow.
Open element 6 and re-size by 50%.
Image flip horizontal.
Copy and paste as a new layer and move to the lower left corner.
Add a drop shadow.
Open element 48 and re-size by 50% and then again by 75%.
Copy and paste as a new layer and drag under the sucker.
Place behind your sucker but to the right of it.
Add a drop shadow.
Open element 46 and re-size by 50% 2x and copy and paste as a new layer.
Image free rotate to the right 90 degrees.
Copy and paste as a new layer and place on the bottom left in front of the sucker and clock.
Using font and colors of your choice place some text at the top.
I rotated the words in different directions for effect.
Open element 69 and copy and paste as a new layer at the top.
Add your name.
Add your copyright information.
Crop and save.