Pages

Monday, January 11, 2016

Chilly City Air



Chilly City Air
written 1/11/2016

This tutorial is meant purely as a guide. Feel free to make your tag unique by using your own choice of tube and scrap kit. If you would like your tag to look just like mine then use the same supplies I have used.

Supplies Used:

Tube by Trinita. You can purchase this tube at http://picsfordesign.com

Scrap Kit is a freebie by Mellisaz Creationz. You can get it at http://melissazcreationz.blogspot.de/2015/12/fantastically-free-blog-train-gothic.html

Mask of your choice. I am using a mask by Millies PSP Madness. You can get it at http://milliespspmadness.blogspot.com/2015/11/mask-137-and-tag-w-nocturne-and-kizzed.html

Sparkle tube of your choice. You can get some nice ones at http://www.hypergurl.com/sparklestubes.html

Font of your choice. I am using Zelda. It is a PTU font but very affordable at $7. You can purchase it at http://www.mightydeals.com/deal/zelda-script-font.html

Plugins:
NONE

Let's Begin:
Open paper 08 from the kit and shift+D to duplicate.
Close the original.
Promote the background layer to a raster layer.
Apply your mask to this paper layer.
Delete the mask layer and merge the group.
Add a drop shadow of
2 -2 100 3.00 black
to the mask layer.
Open element 11 and re-size by 75% and then again by 85%.
Copy and paste as a new layer.
Center within the area that your mask is.
Add a drop shadow of
0 0 100 6.50 black
Open element 09 re-size by 75% and then again by 85%.
Copy and paste as a new layer.
Move over to the far left in front of the black buildings.
Add the same drop shadow.
Open element 16 re-size by 75% and then again by 85%.
Copy and paste as a new layer.
Drag under the first set of black buildings.
Move over towards the right in the gap between the tallest and last building.
Add the same drop shadow.
Merge all 3 building layers together.
Using the sparkle tube of your choice add some sparkles to the buildings in the windows.
Add as many as you like until you are happy with the look.
Open element 10 and copy and paste as a new layer and position over the top of the buildings.
Open your tube.
Re-size if needed.
Copy and paste as a new layer and position in the center of your tag.
Add the same drop shadow.
Open element 13 and copy and paste as a new layer.
Drag under the buildings.
Move to the top left where you can see it peeking out between the gaps in the buildings.
Duplicate and move this copy to the lower bottom right.
Add a drop shadow to both layers.
Open element 15 and copy and paste as a new layer.
Drag under the buildings.
Place so it is on top of the red snowflake at the top left but make sure you can still see the red one.
Duplicate and move this copy down on top of the red snowflake in the lower right corner.
Add a drop shadow to both layers.
Open element 18 and re-size by 85%.
Copy and paste as a new layer and drag to where it is on top of the snow tube that is across the buildings.
Add a drop shadow.
Open element 36 and copy and paste as a new layer.
Move to the bottom where it sits in front of the buildings.
Duplicate several times and move around the bottom of the buildings and your tube. Keep duplicating and arranging until you are happy with the look.
Open element 61 and copy and paste as a new layer.
Re-size by 85%.
Image free rotate to the left by 26 degrees.
Adjust sharpen.
Drag under your tube.
Move to the top right of the tag peeking out from behind your tube.
Open element 26 and re-size by 50%.
Drag down under the snow.
Place to the far left in front of the buildings.
Duplicate it several times and place all along the buildings.
Add a drop shadow to all of them.
Open element 12 copy and paste as a new layer.
Drag under your tube and place at the bottom to the far right.
Duplicate and image flip horizontal.
Move to the far left.
Merge these 2 layers together.
Add a drop shadow.
Add your name.
Add your copyright and licensing information.
Crop and save.


No comments:

Post a Comment