Cupcake Cutie

Cupcake Cutie

written 3/19/2015

Supplies Needed:

Tube is by Sweet Doll Artist. You can get it at http://scrapsncompany.com/index.php?main_page=product_info&cPath=113_462&products_id=8516

Scrap Kit is by Kai Kreations. You can get it at http://scrapsncompany.com/index.php?main_page=product_info&cPath=112_318&products_id=7612

Font of your choice. I am using 2 Peas Chatter. This is a PTU font so you may substitute for any other font.

Drop Shadow Used:

0 0 60 7.50 color #808080

Plugins:

None

Let's Begin:

Open frame 3 and shift+D to duplicate.

Close the original.

Make your canvas large enough to give you room to work with.

Using your magic wand select the inside of the frame.

Go to selections modify and expand by 2.

Layers new raster layer and drag under the frame.

Open paper 3 and edit copy and paste into selection.

Selections select none.

Open element 54 and re-size by 60%.

Copy and paste as a new layer and place in the top center of your frame.

Add a drop shadow to this element and the frame.

Open your tube and re-size her.

You still want her sort of large. Mine is just slightly smaller than the frame.

Copy and paste as a new layer and place in the center of the frame so she is standing on the bottom edge.

Add a drop shadow.

Open element 1 and copy and paste as a new layer.

Drag under your tube.

Now you are going to re-size until it is small enough for her to be standing on and her feet will cover the lettering on it but you want to be able to see it.

Open element 4.

Copy and paste as a new layer and drag under your tube and the piece of chocolate.

Move over to the left hand side and re-size until it comes up just past her elebow.

Add a drop shadow.

Open element 7 and repeat the above steps only placing this one on the right hand side of your tube.

Add a drop shadow.

Open element 13 and copy and paste as a new layer.

Re-size and move to the bottom left in front of the cupcake.

Image rotate to the left 23 degrees.

Adjust sharpen.

Add a drop shadow.

Open element 44.

Copy and paste as a new layer.

Re-size.

Move to the top right of the tag in front of the cloud.

Add a drop shadow.

Open element 52.

Re-size by 50%.

Copy and paste as a new layer and place on the bottom right of the tag.

Duplicate and image flip horizontal.

Move to the bottom left of the tag.

No drop shadow needed as they already have a bit of a shadow on them.

Add your name.

Add your copyright and licensing information.

Crop and save.