Monday, January 12, 2015

Be Mine - Forum Set







Be Mine – Forum Set
written 1/11/2015

Supplies Needed:


Matching Scrap Kit by Bibi's Collection. You can get it at http://scrapsncompany.com/index.php?main_page=product_info&products_id=7381

Font of your choice. I am using Stalemate. You can get it at http://www.1001fonts.com/stalemate-font.html

Plugins:
None

Lets Begin:
We are going to create the tag first then we will move on to the avatar.
Open element 14 and shift+D to duplicate.
Close the original.
Re-size to a size you are happy with as this will be the foundation of your tag.
Make your canvas large enough to give you room to work with.
Using your magic wand select the inside of the far left frame.
Selections modify and expand by 6.
Open your tube and copy and paste as a new layer.
Drag under the frame.
Position so her face is in the framed area.
Selections invert and hit delete.
Selections select none.
Adjust hue and saturation. Colorize with both values set to 0.
Repeat the above steps with the far right frame however flip horizontal your tube so she is facing the opposite direction.
Using your magic wand select the middle frame and selections modify and expand by 6.
Open your tube again and copy and paste as a new layer dragging under the frame.
Position within the framed area.
Selections invert and hit delete.
Selections select none.
Add a drop shadow to the frame.
Open element 43 and image flip vertical.
Re-size by 65%.
Copy and paste as a new layer.
Drag to the bottom and place on the far left side.
Duplicate and image flip horizontal the duplicate.
Move the duplicate to the far right side.
Merge these 2 layers together.
Open element 123 and re-size so it fits nicely along the bottom of your tag.
Copy and paste as a new layer and position.
Open element 10 and re-size by 65%.
Copy and paste as a new layer and place along the bottom but between the 1st and 2nd frames.
Add a drop shadow.
Open element 40 and re-size by 50% and then again by 75%.
Copy and paste as a new layer and move to the far left of the heart cake.
Add a drop shadow.
Duplicate and move the duplicate to the far right side of the 3rd frame.
Duplicate again and image rotate 90 degrees to the left.
Sharpen.
Move this one in front of the heart cake.
Open element 53 and re-size by 50% 2x.
Copy and paste as a new layer and place on the right side of the heart cake.
Add a drop shadow.
Open element 56.
Copy and paste as a new layer and place between the 2nd and 3rd frames.
Add a drop shadow.
Open element 86 and re-size by 50% 2x.
Copy and paste as a new layer.
Image free rotate to the right 27 degrees.
Move over to the far right and drag behind the kiss.
Open element 87 and re-size by 65% 2x.
Image rotate to the right.
Copy and paste as a new layer and drag down to just above the heart splatter.
Place to the far left.
Duplicate and image flip horizontal. Move this duplicate to the far right.
Add a drop shadow to both.
Open element 92 and re-size by 50%.
Image flip horizontal.
Copy and paste as a new layer and position along the top between the 1st and 2nd frames.
Add a drop shadow.
Open element 121 and re-size by 50%.
Copy and paste as a new layer and place between the 2nd and 3rd frames.
Add a drop shadow.
Add your name.
Add your copyright and licensing information.
Crop and save.
Lets make the avatar now.
Open a new blank canvas of 180x180
Open your tube and copy and paste as a new layer.
Re-size if needed and position face within the avatar area.
Open element 123 and re-size by 50%.
Copy and paste as a new layer and place along the bottom.
Open element 92 and image flip horizontal.
Re-size by 50% 2x.
Copy and paste as a new layer and place along the bottom.
Add any other elements from the kit.
Add your name or initial.
Add a border of 2 in black.
Then a border of 5 in the red color from the tube.
Then another border of 2 in black.
Add your copyright and licensing information.



No comments:

Post a Comment