Pages

Wednesday, May 27, 2015

Muted Summer - 3 piece Forum Set




Muted Summer – 3 piece forum set
written 5/27/2015

Supplies Needed:


Scrap Kit by Bibi's Collection. You can get the kit at http://scrapsncompany.com/index.php?main_page=product_info&products_id=10922

Mask of your choice. I am using one by Rachel Designs. You can get it at https://racheldesignsblog.wordpress.com/2015/05/25/mask-set-70/

Font of your choice. I am using Quiglet. You can get it at http://www.dafont.com/search.php?q=quiglet&text=Saturday+Night+Zing

Plugins:
NONE

Let's Begin:
We are going to work on the main tag first then the banner tag and then finally the avatar.

Open paper 7 and shift+D to duplicate.
Close the original.
Promote your background layer to a raster layer.
Re-size the paper layer by 85%.
Un-check the re-size all layers so that just the paper re-sizes.
Apply your mask and delete the mask layer and merge the group.
Open paper 6 and copy and paste as a new layer.
Re-size by 85%.
Apply the mask again and delete the mask layer and merge the group.
Your top mask layer should be just smaller than the first.
Open your full tube and copy and paste as a new layer.
Re-size if needed and position where you would like her.
Add a drop shadow.
Open element 76 and re-size by 85%.
Copy and paste as a new layer and drag under your tube.
Place along the bottom of the tag so she is standing on it.
Open element 75 and image flip horizontal.
Copy and paste as a new layer and place in the top corner opposite your tube.
Add a drop shadow.
Open element 72 and re-size by 50%.
Copy and paste as a new layer and place in the sand.
Add a drop shadow.
Open element 71 and re-size by 50% and then again by 60%.
Copy and paste as a new layer and place in front of the first shell.
Add a drop shadow.
Open element 68 and re-size by 50% 2x.
Copy and paste as a new layer and drag down under the sand.
Place opposite your tube.
Add a drop shadow.
Open element 52 and re-size by 50%.
Copy and paste as a new layer.
Place in front of the barrel.
Add a drop shadow.
Open element 20 and re-size by 50% and copy and paste as a new layer.
Move down under the sand.
Place to the left of your barrel.
Duplicate and image flip horizontal.
Move behind your barrel and to the right side of it.
Open element 24 and re-size by 50% and then again by 65%.
Copy and paste as a new layer and place near the flip flops in the sand.
Open element 32 and re-size by 75% and until it is just smaller than your tube.
Copy and paste as a new layer and drag under your tube.
Place behind her but so you can see it also. Use my tag for reference.
Open element 61 and copy and paste as a new layer.
Drag down to just above your mask layer.
Re-size by 75% until it is the same size and fits nicely on top of your masks.
Add your name and copyright/licensing information.
Now lets work on the banner tag:
Open a new blank canvas that is 600x250
Selections select all.
Open paper 6 and copy and paste into selection.
Selections modify and contract by 9.
Selections invert.
Open paper 7 and and copy and paste as a new layer.
Selections invert again and hit delete.
Selections select none.
Add a drop shadow to this new frame layer.
Open your half cut tube and copy and paste as a new layer.
Move to the far left and add a drop shadow.
Open element 75 and re-size by 65%.
Copy and paste as a new layer and place in the top right hand corner.
Add a drop shadow.
Open element 68 and re-size by 50% 3x.
Copy and paste as a new layer and move to far right side.
Add a drop shadow.
Open element 61 and re-size by 50%. Drag down to just above the background layer.
Add your name.
Add your copyright and licensing information.
Now lets make the avatar:
Open a new blank canvas that is 150x150.
Selections select all.
Open paper 6 and copy and paste into selection.
Selections select none.
Open your cut off tube and copy and paste as a new layer.
Re-size until it fits nicely within the canvas.
Add a border of 2 in black
Add your initial.
Add your copyright and licensing information.






No comments:

Post a Comment